Synergy 4100 – Issue 5 – Edition 1 – 18.01.07 – 7993

Help 73

Possible problems with text messaging

Text messages cannot be sent and screen displays Message Sending Failed

The base station power supply or telephone line cord might not be properly connected. Check that the base station power supply is plugged into the mains socket and switched on and that the telephone is plugged into the telephone wall socket.

There might be a fault on the line. Check your telephone line is working properly.

You might have deleted the server number in error. See page 55-57 for instructions on how to enter the number.

Cannot send text

Check service centre number is correct including 1470P prefix (this is for BT lines. If you have another network provider please check the prefix number with them). In order to send and receive text messages you must not withhold your number. If you normally withhold your number the 1470 prefix presents your number for you.

Cannot receive text

You will not be able to receive text messages until you have first sent a message. The first message sent registers you with the text service.

More than one text messaging product is plugged into the line. Remove other products.

Check service centre number is correct.

Ensure you have subscribed to a Caller Display service and that it is active. You can check this by noting if your phone displays your caller’s number when you receive an incoming call.

If you are using personal user areas please ensure you have given people your user area number and that they are entering it to the end of your telephone number when sending you a text message.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com

Page 73
Image 73
BT 4100 manual Possible problems with text messaging