BT 450 manual Sending messages, Store, Template, OK to

56	Text messaging
	If the text is not sent, the display	Sending messages
	shows Message failed. It is stored
	in the Outbox.	Send a text message

Writing tips

Use the keypad to enter letters and numbers, eg to write today (2day):

Press four times to enter 2.

1.Press Menu, Text is displayed. Press OK.

2.Write new text is highlighted. Press OK.

Press once to enter d.

Press once to enter a.

Press three times to enter y.

Press to enter a space and use

and/or for other characters.

Press Clear to delete incorrect characters.

Press or to move the cursor to the point you want.

Use or to move the cursor to the beginning or end of the text.

Upper & lower case

Press to change between upper (ABC), lower (abc) and sentence (Abc) case letters.

Maximum number of characters in a text message is 160. The display shows a character countdown from 160 down to 0.

In order to send and receive text messages you must not withhold your number. On most networks if you normally withhold your number the 1470 prefix presents your number for you.

3. Use the keypad to enter your message.

Press Option and scroll				or			to:
Send	Press OK.
	Enter the phone number and press Send.
	Or press Option to select a number from the
	Phonebook, Redial list or Calls list. Scroll
		or				to the option you want and
	press OK.		Scroll		to the entry or number you
	want and press OK. Press OK again to send.
Store	Press OK to save the message in the Outbox
	for sending later.
Template	Press OK. The template options are
	displayed. Press						or	to highlight
	the template you want then press							OK to
	insert the template into your text.

If you experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com