Settingup for multiple packs
Ifyou have purchased a BT Verve 450 multiple pack, you will
needto prepare any additional handsets and chargers for use.
Foreach additional handset and charger:
1. Insert the cable through the channel at the rearof the charger
andinsert the plug into the power socket.Plug the other end
intothe mains wall power socket andswitch on.
2. The NiMH battery is already fitted in the handset. Remove the
batterycompartment cover, by sliding it downward and lifting
off.Locate the battery lead and connector and plug it into the
socketinside the battery compartment (the red wire should be
onthe left). Tuck the battery leads in the space above the
batteryand slide the battery compar tment cover back on.
Chargethe battery for at least 20 hours.
9Gettingstarted
Usingyour BT Verve450 on a
Broadbandline?
Ifthis product is to be used on a
broadbandline then you must ensure
thatit is connected via an ADSL
microfilter.Usingthis product on a
Broadbandline without an ADSL
microfiltermay cause problems with
thisproduct and your Broadband
service.
AdditionalBT ADSL microfilters can be
purchasedfrom www.shop.bt.com
Ifyou experience any problems, please call the Helpline on 0800 218 2182* or email bt.helpdesk@vtecheurope.com