then press
Insert.
InsertTemplatePress
Select
.The list of templates
is displayed. Press or to
highlight the Template you want
then press
Insert.
4. When sending a message, the display shows
SendingMessagethen
MessageSent.
Standard text entry
With standard text entry you can enter a word by pressing
each letter button a number of times to display the character
you want on the screen. For example, to write the word
“Hello”, press twice, twice, three times,
three times and three times.
Receiving and reading text messages
When you receive a new text message, the icon is
displayed along with
Youhave X new messages.
Read a new message
1. The Inbox is opened and the list of messages displayed. If you
press
Back
the message is stored in the Inboxfor reading later.
61Text messaging
Do you have two text phone bases
connected to the same phone line?
If you have two text phone base
stations plugged into one line, you are
likely to experience problems receiving
text messages. Normally, only one SMS
enabled base unit (DECT or cordless)
can be plugged into any line.
If you do want to use two base units
and still receive written text you must
delete receive service centre number
from one of the base stations. To do
this on your BTAqua, see page 66.
This will allow you to send text via
either base station but texts will only
be received on the product with the
active receive centre number.
If the base unit with the active receive
centre number is a DECT product then
all handsets registered to will be able
toreceive text messages.
Total number of messages
Your BTAqua can store up to a total of
50 short messages across all handset
Outboxes, Drafts boxes and Inboxes.
Memory full alert
If the textmailboxes arefull when you
attempt to write a new message the
display shows MemoryFull Delete
Messagesfor 2 seconds. You must
delete messages before you can write
and send a new one.
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047or email bt.helpdesk@suncorptech.com