Buffalo Technology LSV40TL user manual Name Descriptions

Chapter 4 Web Admin interface

Network

The following options can be set from the [Network] screen.

Name		Descriptions
	DHCP	If enabled, the LinkStation will attempt to get its IP address
		from a DHCP server on the network.
IP Address Settings	Primary IP Address	Set IP address.
	Subnet Mask	Set Subnet Mask.
Click [Modify Settings]	Default Gateway	Specify by IP address if Default Gateway Address exists.
	Address
to change settings.
	Primary DNS Server	Specify an IP address of the DNS server which has priority.
	Secondary DNS	Specify an IP address of an alternative DNS server.
	Server
	Ethernet Frame Size	Ethernet frame size is the maximum size of data that can be
		sent at a time. If all devices on your network support Jumbo
Ethernet Frame Size		Frame, you may be able to improve transmission efficiency by
		choosing a larger frame size than the default.
Click [Modify Settings]		• [1518 bytes (Default)] It is set to 1518 bytes at
to change settings.		default.
		• [4102 bytes (Jumbo Frame)] Transfer at 4102 bytes.
		• [7422 bytes (Jumbo Frame)] Transfer at 7422 bytes.
		• [9694 bytes (Jumbo Frame)] Transfer at 9694 bytes.
	Network Services	Enable or disable AFP and FTP.
		[AFP] must be enabled here for Mac OS computers to connect
		via AFP. Also, enable AFP in the shared folder settings to use
Network Services		AFP.
		[FTP] must be enabled here for remote users to access the
		LinkStation via FTP. Also, enable FTP in the shared folder
		settings to use FTP.

LinkStation User Manual 125