Buffalo Technology LSV40TL user manual Default Settings

Appendix

Default Settings

The following settings are factory defaults for the LinkStation.

Administrator's Name	admin
Password	password
Shared folders	By default, the folder “share” may be accessed from both Windows and
	Macintosh computers. The recycle bin is [Enabled] on ‘share’ by default.
DHCP Client	Normally, the LinkStation will get its IP address automatically from a
	DHCP server on the network. If no DHCP server is available, then an IP
	address will be assigned as follows:
	IP Address: 169.254.xxx.xxx where xxx are random numbers between 1
	and 254.
	Subnet Mask: 255.255.0.0
Registered Group	The LinkStation has 3 default groups: hdusers, admin and guest. You
	cannot edit or delete these groups.
Microsoft Network	WORKGROUP
Group Setting	Note: If you installed the LinkStation from the LinkNavigator installation
	CD, then the LinkStation's workgroup is set to the same workgroup as the
	computer you used for setup.
Ethernet	1518 bytes
Frame Size
AFP	Disabled
FTP	Disabled
NTP	Automatic
PrintServer	Enabled
WebAccess	Disabled
Media Server	Enabled
(DLNA/iTunes)
BitTorrent	Disabled

Note: The installation program on the LinkNavigator CD can only configure a LinkStation once. To automatically install a LinkStation a second time, use the Init button to initialize the LinkStation’s configuration first.

LinkStation User Manual 152