Buffalo Technology LSV40TL Search, Password for each shared folder, Destination by Password

Chapter 4 Web Admin interface

Name		Descriptions
Backup
	Password to	Steps for Setup
	Search	1 In the Web Admin interface of the backup destination, set [Remote backup
		password] for each shared folder.
		2 When setting up the backup for the LinkStation which is the backup source,
		set the same password of [Search for Backup Destination by Password] as
Search for		for [Remote backup password] which is set for the shared folder you want
		to display as the backup destination.
Backup
Destination		3 Set up the backup at the LinkStation which is the backup source.
by Password
		Select the shared folders of the backup destination from the following.*
Click [Modify		• Shared folders in the LinkStation which is the backup source.
		• The USB hard drive connected to the LinkStation which is the backup
Settings]
		source.
to change
		• A shared folder for which [Remote backup password] is not set in the Link/
settings.
		TeraStation which is the backup destination.
		• A shared folder whose [Remote backup password] in the LinkStation/
		TeraStation which is the backup source matches with [Search for Backup
		Destination by Password].
		* [Backup] must be enabled as a published destination when setting up the
		shared folder.
	Backup Jobs	Click [Create New Job] to set up to 8 backup timers.
	Setup	Back up data saved on the LinkStation to the USB external hard drive or another
		Link/TeraStation at the specified time.
		Notes: • If you choose the USB hard drive in order to utilize this backup feature,
		the USB drive must be formatted in FAT32, XFS or EXT3 The format type
		for a USB hard drive can be displayed on the Web Admin interface,
		[System] - [Storage].
Backup Jobs		• If a USB drive is formatted in FAT32, the maximum file size that can be
		backed up is 4 GB.
Setup
		• Never unplug the Ethernet cable connected to the LinkStation or USB
		hard drive during backup.
		• Do not restore, run Check Disk, Backup Job setup and Folder Setup,
		User/Group, Add, Edit, or Delete User during backup. Otherwise, the
		backup may fail.
		• If an error occurs during a regularly scheduled backup (Every day/Every
		Week), the backup job will not be performed after that. You will need
		to configure the backup job again. However, this does not apply when
		[Ignore Errors and Proceed with Backup] option is selected.

LinkStation User Manual 139