Buffalo Technology LSV40TL Connected to the network, Database before refresh and then click Save

Chapter 4 Web Admin interface

Name		Descriptions
MediaServer
	Media Server	[Restart Media Server]:
	Settings	Click to restart the media server.
		[Authorized DLNA Media Clients]:
		This displays the MAC Address, IP Address, and Device Name of connected
		DLNA clients. Click [Allow] to let a selected client to access DLNA media,
		then click [Apply]. Click [Refresh client list] refresh the list of available clients
		connected to the network.
		[Media Server]:
Media Server		To turn on the media server, click [Modify Settings] and select [Enable].
Settings		[Media Server Folder]:
		Click [Modify Settings] and select a media server folder. If [Show folders on
Click [Modify		USB drives] is enabled, media on connected USB drives will also be available
Settings]		to DLNA clients.
to change		[Automatic Update]:
settings.
		If [Automatic Update] is enabled, the DLNA database is automatically
		refreshed. To immediately refresh the database, select [Refresh now] and
		then click [Save]. To both initialize and refresh the database, select [Initialize
		database before refresh] and then click [Save].
		Note: The [Initialize database before refresh] option is not available for LS-
		XHL LinkStations with firmware version 1.20 or later.
		[Refresh interval (Minute)]:
		After clicking [Modify Settings], the automatic refresh interval can be
		specified in minutes here.

LinkStation User Manual 148