Buffalo Technology LSV40TL user manual Chapter Setup, LinkNavigator Setup LS-VL, LS-XHL, LS-CHL

Chapter 1

Setup

LinkNavigator Setup (LS-VL, LS-XHL, LS-CHL)

1

2

3

4

Connect the LinkStation with an Ethernet cable and the included AC adapter. Plug the power cord into a surge protector or power outlet. Connect the Ethernet cable to a router, hub, or switch on your network. The Ethernet cable will “click” and lock in place when inserted properly.

LinkStation

Network

(Router or Hub)

Move the Power Mode Switch on the back of the LinkStation to the ON position.

Note: Do not set the Power Mode Switch to AUTO at this time. After the initial installation is complete, then the Auto Power Mode may be used.

Wait until the power LED stops blinking and glows a steady blue.

Power LED

Insert the Utility CD in your computer’s CD drive. LinkNavigator will launch. Click [Begin Installation]. The wizard will guide you through installation.

If LinkNavigator does not launch automatically, open the Utility CD and double-click [LSNavi.exe].

This example shows a LS-VL LinkStation. Your screen may be slightly different.

LinkStation User Manual 4