Chapter1 Setup

Back

3

Fan

 

Do not block the fan when installing the unit.

4

USB 2.0 Connector

 

You may attach a USB device such as a digital camera,

3

4

6

5

printer, memory card reader, or hard drive. USB hubs, mice,

keyboards, and all-in-one printers are not supported. USB

card readers that support multiple memory cards may not

function properly.

5 Power Mode Switch

AUTO: Automatically powers the LinkStation on and off with your computer.

7 8

5

ON: Turns the LinkStation on.

OFF: Turns the LinkStation off.

6LAN Port Connect an Ethernet cable here. The Link/Act LED by the LAN port turns green when the unit is connected

to the network and flashes when there is network activity.

7Power Connector Connect the AC adapter here. When it’s connected properly, the LED to the right will glow green.

8Hook Use as a strain relief for the AC adapter cable.

7

8

LinkStation User Manual

12

Page 13
Image 13
Buffalo Technology LSV40TL Fan, Do not block the fan when installing the unit, USB 2.0 Connector, Power Mode Switch