Using your LinkStation

4

1

2

3

Notes:

Configuring LinkStation # 2 to use LinkStation # 1 as a backup destination

In the Web Admin interface, navigate to [System] - [Backup].

Click [View NAS Devices].

1Check the [IP Address] of the LinkStation you want to specify as a backup destination from [Local LinkStations].

2Enter IP address of the LinkStation you want to specify as a backup to [Off Subnet LinkStations] and click [Add].

If LinkStation # 2 (backing up) and LinkStation # 1 (with the destination folder) are on different networks, you must create a VPN connection between the two networks before the LinkStations will be able to see or back up to each other.

If you are using Jumbo Frame and back up data from one LinkStation or TeraStation to another LinkStation or TeraStation, set the Ethernet frame sizes of the LinkStations/TeraStations to the same settings (or the closest available). If the Ethernet frame sizes are significantly different, the backup job may fail. If you have problems with backup jobs, select the default frame size (1518 bytes).

LinkStation User Manual

73

Page 74
Image 74
Buffalo Technology LSV40TL user manual Using your LinkStation