Chapter 4 Web Admin interface

Power Management

 

Synchronization

[synchronize with UPS connected to this LinkStation]:

 

with UPS

Select to synchronize the LinkStation with a UPS that is directly

 

 

connected.

 

 

[synchronize with UPS connected to other LinkStation on the

 

 

network]:

 

 

Select to synchronize the LinkStation with a UPS that is

 

 

connected to a different LinkStation on the same network.

 

 

[do not synchronize with UPS]:

 

 

Select if synchronizing to a UPS is not desired.

 

synchronized

If [synchronize with UPS connected to other LinkStation on the

UPS Settings

source LinkStation

network] is selected, enter the IP address of the LinkStation that

 

IP Address

is directly connected to the UPS.

Click [Modify Settings]

UPS Connection

Select a connection method with UPS.

to change settings.

Type

Note: [USB Port (APC Style)] or [USB Port (OMRON Style)] can be

 

 

 

 

 

only set when UPS manufactured by APC for USB connection is

 

 

connected.

 

LinkStation

Allows you to set the time until shutdown when the power

 

behavior When

failure continues. Or, it can shut down when it detects "Battery

 

Power failure

Low" from UPS.

 

 

Note: “Low Battery” shutdown is only supported with UPSs that

 

 

are connected to the LinkStation via USB.

 

 

 

 

UPS Behavior After

Specify whether or not to shut down the UPS after shutting

 

LinkStation has shut

down the LinkStation.

 

down

 

 

Timer Interval

Select Sleep Timer interval from [Disable], [Everyday], or [Specific

 

 

day of the week]. If selecting [Specific day of the week], specify

 

 

the day by clicking the check box of the day. Timer can be set

SleepTimer

 

from 1 - 3.

Wake up at

Specify a wake-up time for the LinkStation to recover from sleep

 

Click [Modify Settings]

 

mode and resume its normal state. Times from 0:00 to 23:45 are

 

allowed.

to change settings.

Begin Sleep at

Specify a time for the LinkStation to move from its normal

 

 

functionality to a standby state (“sleep mode”). Times from 0:00

 

 

to 27:45 are allowed.

 

 

Note: The wake-up time must be later than the beginning time.

LinkStation User Manual

144

Page 145
Image 145
Buffalo Technology LSV40TL Connected, Select to synchronize the LinkStation with a UPS that is, Synchronized, Allowed