PROGRAMMING THE BREWER (cont.)

SET NEW RECIPE:

If not using a Smart Funnel (with a sensor coil) and/or a G9-2T DBC or MHG Grinder, the brewer will function as a standard Bunn Single TF DBC Brewer:

It is possible to operate the brewer without using a Smart Funnel and/or a G9-2T DBC or MHG Grinder. If a standard funnel, or if a non-DBC grinder is used the brewer will automatically select a NO NAME coffee name when the BREW switch is pressed. This means that no name was read from the funnel's handle.

There is one NO NAME coffee program that can be set in the brewer. It is referred to as NO NAME.

The instructions for programming the NO NAME settings are on the following pages. The same steps are followed for setting the recipe as those that are used to MODIFY A RECIPE, beginning on page 21.

Note that when the display reads NO NAME, that is when MODIFY should be pressed in order to set the parameters for the NO NAME coffee.

NOTE: Before beginning setup, insert a funnel into the funnel rails, and place a ThermoFresh Server beneath the brew funnel.

REVIEW RECIPES?

NOYES

EXIT TO

NEXT FUNCTION

SCREEN

NO-NAME

MODIFYSHOWNEXT

BREW OZ. XX.X

(COFFEE NAME)

(-) DONE (+)

MODIFYSHOWNEXT

BREW OZ. XX.X (-) DONE (+)

P2441

Page 22

35879.1 071405

 

Page 22
Image 22
Bunn S/N SNG0033000 & UP manual Review RECIPES? Noyes