TROUBLESHOOTING (cont.)

 

Problem

Possible Cause

Weak beverage (cont.)

6. Incorrect Recipe

Brewer is making unusual noises.

1. Solenoid (Inlet)

2. Plumbing lines

3. Water Supply

4. Tank Heaters.

Troubleshooting Procedures

Consider adjusting bypass percent- age, preinfusion, or pulse brew. Contact Bunn-O-Matic for sugges- tions.

The nut on back of the solenoid must be tight or it will vibrate during operation

Plumbing lines should not be resting on the counter top.

(A)The brewer must be connected to a cold water line.

(B)Water pressure to the brewer must not be higher than 90 psi (620 kPa). Install a regulator if necessary to lower the working pressure to ap- proximately 50 psi (345 kPa).

Remove and clean lime off tank heaters.

Page 50

35879.1 071405

 

Page 50
Image 50
Bunn S/N SNG0033000 & UP manual Troubleshooting Problem Possible Cause Weak beverage, Brewer is making unusual noises