SERVICE (cont.)
CONTACTOR ASSEMBLY (ELECTRO/MECHANICAL ONLY) (cont.)
Removal and Replacement:
1.Remove all wires from the contactor.
2.Remove the two
3.Securely install the new contactor inside the hood.
4.Refer to Fig. 7 when reconnecting the wires.
RED L1 to Terminal Block (Red Insert)
BLK L2 to Limit Ther- mostat
BLK to WHI Lead from the Three Pole 120/208V or 120/ 240V Terminal Block
BLK to RED Lead from the Two Pole 200V or 240V Ter- minal Block
BLK T2 to Tank Heater
RED T1 to Tank Heater
BLK to BLK Lead from Thermostat
MECHANICAL THERMOSTAT ONLY
P1113
FIG. 7 CONTACTOR ASSEMBLY TERMINALS
Page 19 | 27362 | 092900 |
|
|