8.INSTALLATION & OPERATION OF QUICK DRAW LATCH ATTACH
WARNING 
ALWAYS READ AND FOLLOW OPERAT- ING INSTRUCTIONS BEFORE OPERATING QUICK DRAW LATCH ATTACH.
INSTALLATION INSTRUCTIONS
IMPORTANT: Do not extend bucket cylinders without quick draw latch attach installed on loader. Failure to follow these instructions will void loader warranty.
Install quick draw latch attach to loader using four (4) pins as specified below. Secure pins using clevis pins and cotter pins, 4 places. Refer to Figure 1.
3
5
1
2
4
Figure 1
(1)Top pin
(2)Bottom pin
(3)Clevis pin 5/16" x 2", 4 places.
(4)Cotter pin 1/8" x 1", 4 places.
(5)Quick Draw Latch Attach Adapter.
OPERATING INSTRUCTIONS
CAUTION 
EXCEPT WHEN DETACHING OR ATTACH- ING A QUICK DRAW BUCKET OR ATTACH- MENT TO YOUR QUICK DRAW LATCH ATTACH, ALWAYS POSITION THE QUICK DRAW HANDLE IN THE HANDLE ENGAGED POSITION, FIGURE 6, PAGE 28 THIS WILL PREVENT ACCIDENTAL TRIP- PING OF QUICK DRAW HANDLE WHEN NOT IN USE.
TO AVOID PERSONAL INJURY, KEEP HANDS AWAY FROM LOADER WHEN OPERATING.
IMPORTANT: To maintain your quick draw latch attach functioning properly, always inspect quick draw latch attach and quick draw handle linkage components for damage. If damage exists, replace component immediately.
IMPORTANT: To maintain your quick draw latch attach functioning properly, always keep quick draw latch attach, loader push off bar, quick draw handle linkages, and pin areas clean. Refer to Figure 2.
4
2
5 | 3 |
1
|
| Figure 2 |
|
|
|
|
| 6 |
| ||
|
|
|
|
|
|
(1) | Quick draw latch attach. |
|
|
| |
(2) | Quick draw handle. |
|
|
| |
(3) | Quick draw notch. |
|
|
| |
(4) | Loader push off bar. |
|
|
| |
(5) | Quick draw handle linkages. |
|
|
| |
(6) | Quick draw pin area. |
|
|
| |
|
|
|
|
|
|
27
