Bush Hog 3860 QT manual Upper channel Weld-in center support Bucket or attachment

IMPORTANT: The quick draw latch attach must only be used in combination with quick draw buckets or attachments. To verify that your bucket or attachment can be used with your quick draw latch attach, inspect inside of upper channel to see that weld-in center support has been incorporated within chan- nel section. Refer to Figure 3. If your bucket or attachment does not incorporate this support, consult your Bush Hog Dealer.

Figure 3

(1)Upper channel.

(2)Weld-in center support.

(3)Bucket or attachment.

QUICK DRAW HANDLE DISENGAGED POSITION: To position quick draw handle into the handle disen- gaged position, pull quick draw handle to the left as shown in Figure 4 and then lock into quick draw notch as shown in Figure 5.

QUICK DRAW HANDLE ENGAGED POSITION: Figure 6 shows quick draw handle in the handle engaged position. When quick draw handle is in this position, quick draw handle must line up with handle engaged arrow located on Warning Decal. Refer to Figure 5.

Figure 4

(1) Handle disengaged position.

Figure 6

(2) Handle engaged position.

Figure 5

(3)Quick draw notch.

(4)Handle engaged arrow of decal.

28