Bush Hog 3860 QT Table Of Contents, Retail Customer’S Responsibility Under The Bush Hog Warranty

3860 QT

TABLE OF CONTENTS

SECTION		PAGE
	Warranty	2
	Dealer Preparation Check List	3
	Safety Precautions	4
	Federal Laws & Regulations	6
1.	INTRODUCTION & DESCRIPTION	7
	Introduction	7
	Description	7
	Technical Specifications	8
2.	INSTALLATION INSTRUCTIONS	9
	Tractor Preparation	9
	Installation	9
	Quick Draw Latch Attach	10
	Torque Identification	11
3.	PRE-OPERATION INSTRUCTIONS	12
	Transmission Fluid	12
	Initial Loader Operation	12
	External Loader and/or Tractor Valve	12
	Neutral Position	13
	Float Position	13
	Initial Loader Operation	13
	Removing Air From Hydraulic System	13
	Hose Identification	13
	Bucket Level INdicator	13
	Remote Hoses Support	14
	Third Cylinder Tube Kit	14
4.	MAINTENANCE	15
	Daily Checks	15
	Loader Lubrication	15
	Quick Draw Latch Attach Lubrication	16
5.	OPERATING INSTRUCTIONS	16

SECTION		PAGE
	General Safety	16
	Bucket Level Indicator	16
	Operation	16
	Handling Large Heavy Objects	21
	Back Grading	21
	Troubleshooting	22
6.	DISMOUNTING THE LOADER	23
7.	MOUNTING THE LOADER	25
8.	INSTALLATION & OPERATION OF
	QUICK DRAW LATCH ATTACH	27
	Installation Instructions	27
	Operating Instructions	27
9.	INSTALLING BUCKET OR ATTACHMENT
	TO QUICK DRAW LATCH ATTACH	29
	Operating Instructions	29
10.	REMOVING BUCKET OR ATTACHMENT
	FROM QUICK DRAW LATCH ATTACH	31
	Operating Instructions	31
11.	BUCKET ATTACHMENT	32
	Quick Draw Bucket	32
	Single Tine Kit	32
12.	SUPER PENETRATOR BALE PROBE
	ATTACHMENT	33
	Installation Instructions	33
	Operating Instructions	33
13.	DOZER ATTACHMENT	34
14.	MANURE FORK ATTACHMENT	34
15.	PALLET FORK ATTACHMENT	35
16.	GRAPPLE ATTACHMENT	36
Safety Decals		41
Torque Specifications		43

RETAIL CUSTOMER’S RESPONSIBILITY

UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling of the product for the purpose of performing a warranty obligation or inspection.

1