1. INTRODUCTION AND DESCRIPTION
Figure 1 Major Components
Gauge Rod
Subframe
Bucket Cylinder
Boom Cylinder
Bucket
Cross Tube
Parking Stand
INTRODUCTION
We are pleased to have you as a Bush Hog cus- tomer. Your Front End Loader has been carefully designed to give maximum service with minimum down time. This manual is provided to give you the necessary operating and maintenance instructions for keeping your front end loader in top operating condition. Please read this manual thoroughly. Understand what each control is for and how to use it. Observe all safety precautions decaled on the machine and noted throughout the manual for safe operation of implement. If any assistance or addi- tional information is needed, contact your authorized Bush Hog dealer.
NOTE
All references made to right, left, front, rear, top or bottom is as viewed facing the direction of forward travel with implement properly attached to tractor.
DESCRIPTION
The model 3860 Front End Loader (Figure 1) is designed for two and four wheel drive tractors. It comes equipped with parking stands to support loader so tractor can be “driven in” for quick attach- ment, optional hydraulic self leveling for maintaining the load in position during the raising and lowering cycle and a bucket level indicator that allows opera- tor to gauge bucket position when bucket cannot be seen. Available attachments include buckets for lift- ing loose materials; a bale spear for lifting round hay bales; a grapple attachment for handling bulky mate- rials; a dozer for pushing; and a fork lift for palletized material. All operations should be conducted within the loader limits specified in Technical Specifications.
7
