Installing the SEHI
To stack the SEHI together with an SEH
1.Attach the SEHI HubSTACK Interconnect cable to the “OUT” port on the rear panel of the SEHI as shown in Figure
2.Attach the other end of the SEHI HubSTACK Interconnect cable to the “IN” port on the rear panel of the SEH.
To stack SEH non-intelligent hubs together, proceed as follows:
1.Attach the SEH HubSTACK Interconnect cable to the “OUT” port on the rear panel of the SEH as shown in Figure
2.Attach the other end of the SEH HubSTACK Interconnect cable to the “IN” port on the rear panel of the SEH next in the stack.
SEH HubSTACK
Interconnect Cables
| ||
OUT | SEH INTERCONNECT | IN |
| ||
OUT | SEH INTERCONNECT | IN |
| ||
OUT | SEH INTERCONNECT | IN |
| ||
OUT | SEH INTERCONNECT | IN |
OUT | SEH INTERCONNECT |
SEHI HubSTACK | 165210 |
| |
Interconnect Cable |
|
Figure
SEHI User’s Guide |