Cabletron Systems SEHI-22FL manual To select a module or port

The Device Statistics Screen

PORT

This command lets the user view port statistics for ports 1-26 of the selected module.

Selecting the Appropriate Module/Port

When the Device Statistics screen first appears, statistics are displayed for Module 1 and Port 1. To view statistics for another module and port, use the Module x or Port x commands at the bottom of the screen.

To select a module or port:

1.Use the arrow keys to highlight the Module or Port command.

2.Press the SHIFT and + keys, or the SHIFT and - keys until the desired module or port number appears.

3.Press ENTER. Statistics associated with the selected Module and Port appear.

Using the ENABLE PORT Command

The ENABLE PORT command lets the user enable the selected port. The user must first use the PORT command to select the desired port.

Use the following steps to set the ENABLE PORT command:

1.Use the arrow keys to highlight the ENABLE PORT command at the bottom of the screen.

2.Press ENTER. The corresponding port is enabled and the Port Admin Status field is updated.

SEHI User’s Guide 7-23