Cabletron Systems SEHI-22FL manual This command lets the user enable the selected port

Chapter 7: Local Management

PORT ADMIN. STATUS

Displays the administrative status of the port selected. The two possible status messages are Enable or Disable.

PORT SEG. STATUS

Displays the segmentation status of the port selected. The two possible status messages are Segmented or Unsegmented. The SEHI and SEH automatically partition problem segments, and reconnect non-problem segments to the network.

ENABLE PORT

This command lets the user enable the selected port.

DISABLE PORT

This command lets the user disable the selected port.

UPDATE-FREQ

This command lets the user select the time interval between Stack/Module/Port counter updates. Choose update intervals up to 99 seconds in increments of 3 seconds.

MODULE

This command lets the user view statistics for a selected module in the stack. The SEHI is Module 1 and each SEH in the stack follows in sequential order. Figure 7-9 shows each module number in the stack.

SEH - MODULE 5

SEH - MODULE 4

SEH - MODULE 3

SEH - MODULE 2

SEHI - MODULE 1

1490_28

Figure 7-9 Module Number Sequence

7-22 SEHI User’s Guide