Cabletron Systems SEHI-22FL manual Accessing Local Management

Chapter 7: Local Management

7.3ACCESSING LOCAL MANAGEMENT

After configuring the local management terminal and properly attaching the cables to the SEHI, access the Local Management interface.

1. Power up the terminal. The password screen (Figure 7-2) appears.

SEHI LOCAL MANAGEMENT

Cabletron SEHI Revision X.XX.XX

Cabletron Systems Incorporated

35 Industrial Way, P.O. Box 5005

Rochester, NH 03867-0505 U.S.A.

(603)332-9400

(c)Copyright Cabletron Systems, Inc. 1993

SEHI F/W Version: X.XX.XX

Boot Prom Version: X.XX.XX

SEHI Board Version: X.X

EnterUser Password:

1490_21

Figure 7-2 Password Screen

2.Enter the Password. The factory default password for Super-User access is “public” or press ENTER.

NOTE

The password is one of the community names specified in the Community Name Table. Access to certain Local Management capabilities depends on the degree of access accorded that community name. Refer to Section 7.5 for more details about community names.

3.Press ENTER.

•If the password entry is invalid, the cursor returns to the beginning of the password entry field.

•If the password is valid, the associated access privilege appears briefly, then the SEHI Local Management Feature Selection screen shown in Figure 7-3 appears.

7-6 SEHI User’s Guide