Chapter 7: Local Management
Using the DISABLE PORT Command
The DISABLE PORT command lets the user disable the port selected in the PORT command. The user must first use the Port command to select the desired port.
To set the DISABLE PORT command:
1.Use the arrow keys to highlight the DISABLE PORT command at the bottom of the screen.
2.Press ENTER. The corresponding port is enabled and the Port Admin Status field is updated.
Exiting the Device Statistics Screen
Use the following steps to exit the Device Statistics screen and return to the Feature Selection screen:
1.Use the arrow keys to highlight the RETURN command at the bottom of the screen.
2.Press ENTER. The Feature Selection screen appears.
SEHI User’s Guide |
