Cabletron Systems SEHI-22FL The following sections explain each field on the Configuration screen

The Configuration Screen

The following sections explain each field on the Configuration screen.

I/F

The number of the interface corresponding to the channels over which packets with that IP Address pass. On the SEHI, this value is “1.”

IP Address

Displays the IP address of the SEHI.

SubNET Mask

Displays the subnet mask for the SEHI. A subnet mask is a 32-bit quantity which “masks out” the network bits of the IP address. Do this by setting the bits in the mask to 1 when the network treats the corresponding bits in the IP address as part of the network or subnetwork address, or to 0 if the corresponding bit identifies the host.

MAC Address

Displays the physical address associated with the interface.

Default Gateway

Displays the default gateway for the SEHI. This field is not defined until an appropriate value is entered. The default gateway identifies the default gateway device that forwards packets to other IP subnetworks.

Serial Port Application

Displays the port application setting as CONSOLE.

Baud Rate

Displays the Baud Rate setting of the device attached to the SEHI through the serial port. The setting for the serial port is 9600.

Port Enable Override

This command lets the user override the Disable Port settings in the Device Statistics screen to enable all ports in the stack.

SEHI User’s Guide 7-11