34
Explorer Frames Type
Sets the type of explorer that should be used for ARP/RARP traffic. From the set of IP protocols explorer frame type can be chosen only for ARP/RARP frames. Other IP protocols can generate only STE explorer.
Value | Meaning |
|
|
|
|
ARE | The All Routes Explorer should be used. |
|
|
STE | Spanning Tree Explorer should be used. |
|
|
|
|
Table 10. IP: Explorer Frames Type
Value | Meaning |
|
|
|
|
ARE | Use All Routes Explorer. |
|
|
STE | Use Spanning Tree Explorer. |
|
|
|
|
Table 11. IP: Explorer Frames Type
Default: STE (change to ARE for typical Token Ring behavior for ARP frames)
Enable IP Fragmentation
Enables or disables fragmentation of IP frames received from Token Ring and transmitted to Ethernet. The possible values are Enabled and Disabled.
Default: Enabled
TR MAC Address for IP Multicasts
Allows entering the IP multicast address. The address is entered in the MAC address format.
Default: C00000:040000
Novell Conversion Status
Display only. Shows the current status of the Novell Conversion.
Possible values are Enabled and Disabled.
Configuration |
