38
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration
Explorer Frames Type
Sets the type of explorer that should be used for NetBios traffic.
Default: STE
TR Functional Address
The TR Functional Address is entered in the MAC address format.
Default: C00000:000080
Ethernet Group Address
The Ethernet Group Address is entered in the MAC address format.
Default: 030000:000001
SNA Conversion Status
Display only. Shows the current status of the SNA Conversion.
Possible values: Enabled and Disabled.
SNA Conversion Parameters Change
To change SNA conversion parameters select SNA conversion parameters
change on the Frame Conversion Configuration menu of the TS port.
SNA Frames Conversion
Sets the state of the SNA Frames Conversion. Possible values are Enabled and
Disabled. If the state is set to Disabled, SNA traffic will be dropped.
Default: Enabled
SNA: Token Ring Format
Sets the format of SNA frames on Token Ring.
Valu e Mea nin g
ARE Use All Routes Explorer.
STE Use Spanning Tree Explorer.
Table 19. NetBios: Explorer Frames Type
Format Mean ing
802.5 Frame in the IEEE 802.5 format.
Table 20. SNA: Token Ring Format