Cabletron Systems SSIM-H2-02 manual Dual Home FEP Addresses Configuration, Default STE

43

Source Routing

Enables or disables Source Routing in Other Frames w/o SNAP frames transmitted to Token Ring.

Value	Meaning
SR	Source Routing information will be added to frames
	converted from Ethernet to Token Ring format.
noSR	Frame will be transmitted to Token Ring as a transparent
	frame.

Table 30. Other Frames w/o SNAP: Source Routing

Default: SR

Explorer Frames Type

Sets the type of explorer that should be used for Other Frames w/o SNAP traffic.

Value	Meaning
ARE	Use All Routes Explorer.
STE	Use Spanning Tree Explorer.

Table 31. Other Frames w/o SNAP: Explorer Frames Type

Default: STE

Dual Home FEP Addresses Configuration

To configure Dual Home FEP Addresses on a TS port, select Dual Home FEP Addresses Configuration on the Virtual Port Configuration menu of the TS port. For each Virtual Port (on each TS port), 10 addresses can be configured as Dual Home FEP addresses. A constant list of 10 MAC addresses numbered 1-10 is shown when this menu is opened. Addresses which consist entirely of zeros represent empty entries.

To add or change an address, highlight the address, press ENTER, and then either enter the new MAC address or simply press ENTER once more to enter a NULL address (empty entry).

❏

SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Configuration