Samsung CLX-6240 Series Not Assigned, Not Available, Try Again Later, NonSAMSUNG, Toner, Stop

MESSAGE	MEANING	SUGGESTED
		SOLUTIONS
Not Assigned	The speed button or	Enter the number
	speed dial number	manually using the
	you tried to use has	number keypad or store
	no number assigned	the number or address.
	to it.
Not Available	Can not perform the	Try again when current
Try Again Later	task immediately	task is completed.
	because too many
	tasks are running at
	once.
NonSAMSUNG	The color toner	You can select either
Toner	cartridge which the	Stop or Continue with
T	arrow indicates is not	the left/right arrow.
	a Samsung-genuine	If you select Stop by
	cartridge.	pressing OK on the
	Press OK to toggle	control panel, the
	the message to Stop	machine stops printing.
	or Continue.	If you select Continue,
	W Stop X	the machine keeps
		printing, but the quality
		cannot be guaranteed.
		If you do not select any,
		the machine will work as
		Stop is selected.
		Replace the
		corresponding toner
		cartridge with a
		Samsung-genuine
		cartridge. See page 64.
One Page is	Single page data	Reduce the resolution
Too Large	exceeds the	and try again.
	configured mail size.
Operation	You are in the Add	Check the display to see
Not Assigned	Page/Cancel Job	if there are any
	operation, but there	scheduled jobs.
	are no jobs stored.
Out-Bin Full	The output tray of the	Remove paper.
	machine is full of
	paper.
Paper Jam 0	Paper has jammed in	Clear the jam. See page
Open/Close Door	the feeding area of the	71.
	tray.
Paper Jam 1	Paper has jammed	Clear the jam. See page
Open/Close Door	inside the machine.	73.
Paper Jam 2	Special print media	Clear the jam. See page
Check Inside	has jammed in the	74.
	paper exit area.
Power Failure	Power has turned off	The job which you were
	then on and the	trying to do before the
	machine’s memory	power failure must be
	has not been back up.	completely re-done.
Remove Paper	Paper has jammed in	Clear the jam. See page
in Rear Cover	the paper rear cover	74.
	area.

MESSAGE	MEANING	SUGGESTED
		SOLUTIONS
Refilled Toner	The toner cartridge	The print quality may get
T	you have installed is	poor if the refilled toner
	not genuine or refilled.	cartridge is installed,
		since its characteristics
		may significantly differ
		from the genuine.
		We recommend
		Samsung-genuine color
		toner cartridge.
Replace Toner	This message	Replace the toner
T	appears between	cartridge with a new one.
	Toner Empty and	See page 64.
	Toner Low status.
Replace	The life of the part	Replace the part with a
[xxx]	expires totally.	new one. Call for
		service.
Replace	The life of the part	See page 66 and call for
[xxx] Soon	expires soon.	service.
Retry Redial?	The machine is	You can press OK to
	waiting for a specified	immediately redial, or
	time interval to redial	Stop/Clear to cancel the
	a previously busy	redial operation.
	station.
Reverse Jam 0	Paper has jammed in	Clear the jam. See page
Check Inside	the paper fuser area	74.
	and In the cover of
	reverse unit area.
Reverse Jam 1	Paper has jammed In	Clear the jam. See page
Check Inside	the cover of reverse	73.
	unit area or in the rear
	cover.
Scanner locked	The scanner module	Unlock the scanner and
	is locked	press Stop/Clear.
Self Diagnostics	The engine in your	Wait a few minutes.
Temperature	machine is checking
	problems detected.
Self Diagnostics	The LSU (Laser	Wait a few minutes.
LSU	Scanning Unit) in your
	machine is checking
	problems detected.
Send Error	There is a problem in	Configure the
(AUTH)	SMTP authentication.	authentication setting.
Send Error	There is a problem in	Configure the DNS
(DNS)	DNS.	setting.
Send Error	There is a problem in	Configure the POP3
(POP3)	POP3.	setting.
Send Error	There is a problem in	Change to the available
(SMTP)	SMTP.	server.

78_Troubleshooting