Changing the font setting
Your machine has preset the font for your region or country.
If you want to change the font or set the font for special condition such as the DOS environment, you can change the font setting as follows:
1.Ensure that you have installed the printer driver from the provided software CD.
2.
3.Click Printer Setting.
4.Click Emulation.
5.Confirm if PCL is selected in Emulation Setting.
6.Click Setting.
7.Select your preferred font in the Symbol set list.
8.Click Apply.
Following information shows the proper font list for corresponding languages.
•Russian: CP866, ISO 8859/5 Latin Cyrillic
•Hebrew: Hebrew 15Q,
•Greek: ISO 8859/7 Latin Greek,
•Arabic & Farsi: HP
•OCR :
Using the SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.
Installing the program
1.Insert the driver CD provided along with your machine. When the driver CD runs automatically, close the window.
2.Start Windows Explorer and open the X drive. (X represents your CD- ROM drive.)
3.Double click Application > SetIP.
4.Open the folder of the language you plan to use.
5.Double click Setup.exe to install this program.
6.Follow the instructions in the window and complete the installation.
Starting the program
1.From the Windows Start menu, select All Programs > Samsung Network Printer Utilities > SetIP.
2.Select the name of your printer and click 
.
If you cannot find your printer name, click 
to refresh the list.
3.Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.
If you do not know the network card's MAC address, print the machine's network information report. (See "Printing reports" on page 60.)
4.Click OK to confirm the settings.
5.Click Exit to close the SetIP program.
Getting started_ 31
