Cabletron Systems SSIM-H2-02 manual Port Status

47

Port Status

Besides the ordinary Token-Ring ports, the table contains an entry for each TS virtual port, along with its current status.

When Port Status is selected on the Statistics menu, the following items are displayed:

Port

The TS port for which the virtual port is defined. Possible values are: 21, 22, 25, and 26.

TrCRF

The name of the CRF in which the virtual port is defined.

TrBRF

The name of the BRF in which the virtual port is defined.

Enabled/Ins

For ordinary Token Ring ports, this is the enabled and inserted status. This does not apply to virtual ports on a TS port. Instead, the current state of the virtual port is displayed. For details, refer to the description of virtual port configuration.

Spd

The connect speed in Mbps, which is displayed as 10 or 100 for TS module virtual ports. Note that 100 Mbps full-duplex is the total bandwidth available on a TS port and is shared by all the virtual ports on that port. The actual bandwidth on a particular virtual port depends on the amount of traffic on other virtual ports.

Oper Mode

The operation mode is for TS virtual ports may be displayed as HDX (Half DupleX) or FDX (Full DupleX).

Fwd Mode

The forwarding mode is always displayed as Store-Fwd, since the SSIM-H2-02 always operates in the store-and-forward switching mode.

SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide Statistics