Save Password
Saves the entered password.
Passive Mode
Uses passive mode to send transmissions to the FTP server.
IMPORTANT
Use passive mode when normal communication with the FTP server cannot be established. However, be aware that communication may not be possible if the network is not functioning properly.
[OK] button
Registers a new FTP server with the specified parameters.
Address type: Shared folder
This option registers a folder shared publicly on the network.
Name
Enter the name to display on the scanner.
Computer Name (Host Name)
Enter the name of the computer containing the publicly shared folder. When the ScanFront Service is running, you can enter the IP address instead of a host name.
Folder path
Enter the path to the subfolder that you want to register as the name of the shared folder.
[Browse] button
Shows a list of computers connected to the network for you to specify a shared folder.
Hint
You can display the shared folders using the following procedure.
1.After entering the computer name, user name, password, and domain/workgroup, click [Browse]. Access the computer containing the publicly shared folder.
2.Specify any subfolder from the displayed computer and click [OK].
IMPORTANT
•If you click [Browse] without entering the user account information, only computers and workgroups within the same network address will display.
•When displaying workgroups that are not part of a domain, you cannot display computers or workgroups with different network addresses.
•Not all workgroups and computers in the network can be displayed immediately after the ScanFront is started. If some workgroups and computers are not displayed, wait a few minutes and then press [Browse].
•A new folder cannot be created in a specified folder via the Web Menu. If you want to create a new folder, use the computer set as the FTP server or the address editing functions of the ScanFront to create a folder beforehand.
User name/Password
Enter the user name and password of an account with the authority to write data to the shared folder.
Domain/Workgroup
If the computer containing the shared folder is part of a domain, enter the domain name.
IMPORTANT
•If the computer containing the publicly shared folder is part of a domain, enter the user name and password registered with the domain, and the domain name.
•If the computer containing the publicly shared folder is not part of a domain, there is no need to enter a [Domain/Workgroup].