4. Turning the Power ON and OFF
Use the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.
❏Turning the Power ON
Press the power switch to turn the scanner ON. The power indicator lights, and the Home screen or the login screen appears.
| Power switch |
Home screen | Power |
| |
| indicator |
|
|
IMPORTANT
•It takes approximately 40 seconds for the Home screen to appear after the power switch is turned on.
•If users have been registered, the login screen appears. (Refer to “Login screen” on p.
•When the power indicator is lit but nothing appears on the touch panel, Display Off has activated to turn the panel display off. You can touch the panel to restore the display. (Refer to “Display Off” on p.
INSTRUCTIONS.)
•When the power indicator is flashing but nothing appears on the touch panel, the Low Power mode has activated to temporarily stop scanner operations. To switch out of Low Power mode, press the power switch or touch the touch panel. (Refer to “Low Power Mode” on
❏Turning the Power OFF
Press the [Power off] button displayed at the bottom left of the panel to turn the scanner OFF.
IMPORTANT
•When restarting the scanner, wait at least 5 seconds after turning the power OFF before turning it ON again.
•If the scanner stops responding, press and hold the power switch to shut down the system, and then press the power switch to turn the scanner ON again. In such cases, settings configured immediately before shutting down may be lost.
12