6. Scanning Procedure
This section gives an overview of the procedure for sending scanned images from the Home screen.
For more details, refer to the Operation Guide or the ScanFront 300/300P/330 INSTRUCTIONS (electronic manual).
1.Place a document in the scanner.
2.Select a transfer destination by pressing a destination button.
Hint
•You can change the transfer destination by changing the [Address type].
•The following icons are used to indicate the types of address.
:Shared folder | :Fax | |
:FTP | :Group |
|
•Pressing an address adds a checkmark (
) to the icon and selects the address. Pressing a selected address again clears
the selection.
•Each time you press an
:To | :Cc | :Bcc | :Selection cleared |
IMPORTANT
If an address has a shaded background but no check mark, it is not selected.
The [Address selection] screen appears. | 4. If there are no addresses registered in the address |
Hint | book, press [Edit] to register addresses. |
|
You can change the transfer destination from the [Address selection] screen.
3.Press one of the displayed addresses to select it.
Hint
If the address you want to register is for your private use, register it in My Address Book. For details, refer to “Registering and Editing Addresses” on p.
18