●Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet.
●Keep the area around the power plug clear of objects so that the power cord can be disconnected easily in an emergency.
●Use only the AC adapter provided with this scanner. Also, do not use the AC adapter provided with the scanner with any other electrical devices.
Model:
●If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information.
❏Moving the Scanner
●When moving the scanner, always hold it with both hands to avoid dropping it. The weight of the scanner unit is approximately 7.9 lbs (3.6 kg).
●Before moving the scanner, make sure the document tray is closed and the interface cable and AC adapter are disconnected. If the scanner is transported with these items connected, the plugs and connectors may be damaged due to excessive force applied to them during movement.
❏Handling
WARNING
Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock.
■Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner.
■Do not cut, damage, or modify the power cord or AC adapter. Do not place heavy objects on the power cord or AC adapter, and do not pull or excessively bend the power cord.
■Never connect the power cord when your hands are wet.
■Do not connect the scanner to a multiplug power strip.
■Do not knot or coil the power cord, as this may result in a fire or electric shock. When connecting the power cord, make sure that the power plug is securely and completely inserted into the power outlet.
■Do not use power cords and AC adapters other than the power cord and AC adapter provided with this scanner.
■Never try to take the scanner apart or modify it in any way.
■Never try to take the AC adapter apart or modify it in any way, as this is dangerous and may lead to a fire or electric shock.
■Do not use flammable aerosol sprays near the scanner.
■When cleaning the scanner, turn the power OFF and disconnect the power cord from the power supply.
■Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.
1
Use Before