64
Troubleshooting
Battery cover lock not in
lock position
2CR5 lithium battery is
inserted the wrong way
Insufficient battery power
(LCD panel displays [Lb])
Incorrect battery type
Poor contact between
battery and camera
terminals
Mode Dial is set to L (Lock)
position
Problem Cause(s) Solution(s)
Camera will not operate
Camera will not shoot
•Slide the battery cover lock into the
locked position.
•Install the 2CR5 lithium battery with
the terminals oriented toward the
back of the chamber.
•Use a fully charged battery pack.
•Replace the battery.
•Use an approved AC power source.
•Use the specified battery pack or
lithium battery.
•Wipe the battery terminals with a
clean, dry cloth.
•Turn the Mode Dial to any one of
the (Auto), P (Program) or
(Stitch Assist) mode positions.