Canon BP-511 Protecting an Image, Protect the image, From the menu, select [Protect], Open the Protect Settings screen

Protecting an Image

You can erase-protect images to prevent accidental erasure.

You can press the <> button to switch between single-image and index display in order to protect individual pictures.

From the menu, select [Protect].

1 ● Press the <MENU> button.

● Turn the <> dial to select [Protect].

2	Open the Protect Settings screen.
	● Press the <	> button.
	➡ The display goes to the Protect Settings
	screen.
	● Press the <	> button to show the
	Protect Settings screen on an index display,
	then press the <		> button again to show
	the Protect Settings screen on a single
	image display.

Protect the image.

3 ● Turn the <> dial to select the image you want to protect, then press the < > button.

➡ Protected images are identified with a <> icon.

● Press the < > button again to cancel

protection and delete the <> icon.

The < > icon● If you have other images to be protected, repeat the above steps.

● Press the <MENU> button to exit Protect mode.

Once an image is protected, it cannot be removed by the camera’s Erase function. To erase a protected image, you must first remove the protection.

If you protect the images you need and erase all the images at once (→104), all non-protected images will be erased. This is handy when you want to erase all the images you do not need at once.

5

and Playing

Recorded Erasing

Images

103