Inserting and Removing the Battery Pack

Using a Household Power Supply

You can operate the EOS D60 from a household power outlet by using the DC coupler. This enables you to use the camera as long as you like without a battery.

1

2

3

Connect the DC coupler.

●Plug the DC coupler into the compact power adapter.

Place the cord in the groove.

●Carefully insert the cord into the groove.

Insert the DC coupler into the camera.

●Open the cover (→24) and lower the covering on the cord hole.

●Insert the DC coupler and fit the cord into the cord hole.

●Check that the cord is placed tightly in the cord hole, and slide the DC coupler into the chamber until it locks into place.

●Close the cover so that it clicks into place.

Connect the power cord.

4● Connect the power cord to the compact power adapter.

● Plug the cord into a power outlet.

● When you are finished, remove the plug from the power outlet.

●Do not use any DC coupler other than the one provided with your EOS D30 or D60 camera.

●The DC Coupler cannot be used with cameras other than the EOS D30 and D60.

26