Canon BP-511 Cleaning the CMOS Imaging Element, Select [C.Fn-13], Press the < > button, From the menu, select [C.Fn]

Cleaning the CMOS Imaging Element

The imaging element corresponds to the film in a film camera. If dirt or foreign matter gets on this imaging element, black spots may be recorded on the corresponding part of the image. If this happens, use the procedure below to clean the imaging element.

Because the imaging element is very sensitive, we strongly recommend that you have the cleaning done by Canon service representatives.

When cleaning the imaging element, always connect the EOS D60 camera to a household power outlet using the DC coupler. If you try to clean the imaging element while the battery pack is installed in the camera, the cleaning warning message “ ” will blink on the LCD panel and you will not be able to clean the imaging element.

Before you start cleaning, remove the lens. (→27)

1 Insert the DC coupler (→26) and set the Main Switch to <ON>. (→28)From the menu, select [C.Fn].

2 ● Press the <MENU> button.

● Turn the <> dial to select [C.Fn].

3	Press the < > button.
	➡ The Custom Function Setting screen
	appears.

Select [C.Fn-13].

4● Turn the <> dial to select C.Fn-13 [Sensor cleaning], then press the < > button.

5

and Playing

Recorded Erasing

Images

115