
Fully Automatic Picture Taking
●If the CF card becomes full, the CF Full message “ ” appears on the LCD panel and in the viewfinder, and the camera will not take any more pictures. Replace the CF card with another CF card that has capacity available.
●When the
● The focus and exposure are locked when AF focusing is complete.
● The camera automatically focuses on the AF point that is on the subject closest to the camera.
●The image quality can also be set. (→50, 118)
●You can set the beep that indicates the subject is in focus or the beep that indicates the
●If the number of remaining shots to
in the CF card is displayed, changing the image quality will also change this remaining number of shots.
●The LCD panel can be illuminated. (→67, 118)
AutomaticIn the Basic Zone (other than <> and <
>), the flash pops up automatically and fires in
If anything blocks the flash so that it cannot pop up automatically, the error code
“ ” (→135) appears on the LCD panel. When this occurs, set the Main Switch to <OFF> and then set it to <ON> again.
●To take pictures in an area where flash photography is prohibited or using indoor
lighting, the < > (Program) (→68) mode setting is recommended.
●When taking flash pictures of people at night or in dark interiors, we recommend using
●In dark locations, pressing the shutter button
down halfway causes the
● The
● When an
● In the <> and <
> modes, the
2
Picture Simple akingT
39