Set the Main Switch to <OFF >.

Replacing the Date/Time Battery

When the date/time back-up battery level is low, “ ” will appear on the LCD panel. Replace the CR2025 lithium battery as follows.

If you replace the backup battery while the camera is connected to a battery pack with power remaining or to a DC coupler, the date, time, and other menu functions will retain their settings.

1

 

 

Open the date/time battery cham-

 

2 ber cover by turning it 45 degrees

 

 

counterclockwise, as shown by

 

 

the arrow in the diagram.

 

 

● Be careful not to rotate the cover more than

 

 

45 degrees.

 

3

Take out the old battery.

 

● With the camera bottom facing downward,

 

 

 

 

push in the edge of the battery to take it

 

 

out.

 

4

Install a new battery.

(+)

● The plus side of the battery must face

 

upward.

(–)

Close the cover by turning it5 clockwise, as shown by the arrow.

● If the date and time now displayed in the LCD panel are incorrect, you will need to set them. (→34)

For the date/time battery, be sure to use a CR2025 lithium battery.

5

and Playing

Recorded Erasing

Images

113