Canon BP-511 Charging the Battery Pack, Charge lamp, Battery charge, Remove the cover, charge a battery pack, Connect the power cord, Charge the battery pack

Charging the Battery Pack

1

2

<–> mark 3

Connect the power cord.

●Connect the power cord to the compact power adapter.

●Insert the plug into a power outlet.

Remove the cover.

●Store the cover in a place where it will not be lost.

●If you remove the battery from the camera, be sure to reattach the cover to protect against short circuit.

Place the battery in the adapter.

●Align the end of the battery with the <–> mark on the adapter, press down on the battery, and slide it into place.

●To remove the battery, use the reverse of the above.

●Batteries can be charged in either the left or right side of the adapter.

4

Battery charge	Charge lamp
0–50%	Blinks once per
	second
50–75%	Blinks twice per
	second
Over 75%	Blinks three times
	per second
Almost full	Stays on

Charge the battery pack.

➡As soon as you place the battery pack in the compact power adapter, the charge lamp starts blinking and charging begins.

➡When charging is complete, the lamp stops blinking and stays on.

➡It can take up to 90 minutes to fullycharge a battery pack.

●You can check whether a battery is charged by seeing whether the charge lamp blinks

or stays on.

➡When charging is complete, the charge lamp stops blinking and stays on. You can

continue charging the battery for approximately an hour to reach full charge capacity.

●When charging is complete, remove the battery and unplug the power cord from the outlet.

22