Canon BP-511 Shooting, Checking and Handling Images

REFERENCE

Shooting

Unable to shoot or	CF card is not loaded correctly.
record images	➡ Load the CF card correctly. (→28)
	CF card is full.
	➡ Change to a new CF card, or erase unwanted images. (→28, 43,
	104)
	The battery pack is out of power.
	➡ Charge the battery pack. (→22)
	Image out of focus (In-focus light in the viewfinder blinks).
	➡ Press the shutter button down halfway to focus again. If this fails,
	focus manually. (→29, 59)
LCD monitor	Dust or foreign matter on the monitor.
displays and	➡ Clean the monitor with a soft eyeglass cloth.
images are hard to	LCD monitor is worn out.
see	➡ Consult the store where you bought your camera, or a Canon
	Service Center. (→10, back cover)
Images are blurred	Lens focusing mode switch set to <MF> (or <M >).
	➡ Set the focusing mode switch to <AF >. (→27)
	Camera shake when the shutter button is pressed.
	➡ Press the shutter button carefully so that the camera does not shake.
	(→29, 36)
Unable to use the	CF card data is corrupted.
CF card	➡ Format the CF card. (→105)
	➡ Use the specified type of CF card. (→2, 139)
The message	The date/time battery is exhausted.

“ ” appears on ➡ Replace the battery with a new one. (→113) the LCD panel

Checking and Handling Images

Cannot erase	Images may be protected.
images	➡ Remove image protection. (→103)
Incorrect date and	Date/Time setting may be incorrect.
time displayed	➡ Set date/time correctly. (→34)
No image appears	Video cable plugs are not inserted fully.
on the TV screen	➡ Insert the video cable plugs firmly all the way. (→112)
	The correct video format (NTSC or PAL) has not been set.
	➡ Set the camera to the correct video format to match the TV set.
	(→112)

7

Reference

137