
Custom White Balance Setting/LCD Panel Illumination
● For best results, use subjects such as plain white paper for white balance basis. ● White balance data is loaded from the partial metering zone (→17).
●You can store white subjects photographed under various conditions on the CF card, then select these images as needed for the [Custom WB] function as an easy way of setting the ideal white balance for any lighting conditions.
●The default setting for <> is the same as the default setting for <
>.
LCD Panel Illumination
The LCD panel can be illuminated for about 4 sec. by pressing the < > button. Pressing the button again turns off the illumination.
After a picture is taken, the LCD panel illumination turns off automatically after 2 sec.
On the menu, select [LCD illumi.] and set the LCD panel illumina- tion.● Press the <MENU> button.
● Turn the <> dial to select [LCD illumi.],
then press < >.
● Turn the <> dial to select [On], then press <
>.
➡ The LCD panel illumination will be enabled, and the menu will reappear.
● Press the <MENU> to quit the menu and turn off the display.
Illuminating the LCD panel● Press < >.
● To turn off the illumination, press < > again.
● If you operate a button or dial for picture- taking while the LCD panel is illuminated, the illumination will continue. If you press a menu or image playback button, the illumination will turn off.
● If > will not turn off the LCD panel illumination (it will turn off automatically).
●If you take a picture while the LCD panel is illuminated, the illumination will continue as you shoot.
●LCD panel illumination works in all shooting modes.
3
Operations Advanced
67