Check the Image Immediately

You can view the images you take immediately, on the LCD monitor on the back of the camera.

Take the picture.

1 ➡ After the picture is taken, the image as it was shot appears on the LCD monitor. During continuous shooting, the last captured image will be displayed.

● The image is shown for approximately 2 seconds.

● You can turn the Review function on or off, as well as display the image information display. (→41)

●You can change the length of time the image is displayed. (→42)

●You can change the brightness of the LCD monitor. (→120)

●While a picture is being displayed, you can press the <> button to delete that image. (→43) This will erase the image shown on the LCD monitor before it is written to the CF card.

Check the Image in PLAY ModeView the image.

1 ● Press the <> button.

➡ The most recently recorded image appears. ● Press the <> button again to remove the image from the LCD monitor and exit PLAY

mode.

Change the displayed image.

2 ● Turn the <> dial counterclockwise to move back through the images you have taken, from newest to oldest.

● Turn the <> dial clockwise to move through the images from oldest to newest.

While the image data is being written to the CF card (access lamp blinks, →15), the on-screen menu will not be displayed and recorded images cannot be played back. Pressing the <MENU > button or <> button will only display the “Busy” message (→135) on the LCD monitor.

You can also view the images you have taken in index form (→98) or enlarged form (→99).

40