Mounting and Detaching a Lens

Mounting a Lens

1

2

Lens mount index

3

Remove the caps.

●Remove the rear lens cap and the body cap by turning them as shown by the arrows in the diagram.

Attach the lens.

●Align the red dots on the lens and camera and turn the lens as shown by the arrow until it clicks in place.

Set the focus mode switch on the lens to <AF >.

●If the focus mode switch is set to <MF > (or

<M > on older lenses), the autofocus will not

operate and <> will be displayed on the LCD panel.

1

You Before Start

4Remove the front lens cap.Detaching a Lens

Press and hold the lens release button, and turn the lens as shown by the arrow.

● Turn the lens until the index mark is at the top, then remove it.

●Since the EOS D60’s picture coverage is smaller than the normal 35mm film format (see illustration), the EF lens attached to the camera will have a telephoto effect equivalent to 1.6 times the lens focal length.

●AF stands for autofocus.

●MF or M stands for manual focus.

●Be careful not to lose the lens caps or body cap.

EOS D60 image field

(22.7 x 15.1 mm / 0.89 x 0.59 in)

35 mm image field

(36 x 24 mm / 1.42 x 0.94 in)

27