Canon BP-511 button. (16 ), Take the picture, Focus on the subject, Make sure the < > icon in the viewfinder is on

Using the Built-in Flash

FE Lock

FE (flash exposure) Lock obtains and locks the correct flash exposure reading for any part of a subject. FE Lock is a function in the Creative zone.

1

2

3

1

2

Make sure the < > icon in the viewfinder is on.

●In the Creative zone, press the < > button to pop up the built-in flash.

Focus on the subject.

●Focus on the subject you want to lock the flash exposure on.

Place the center AF point over the subject, and press the < >button. (16 )

➡The Speedlite fires a preflash and records the required flash output for this subject in memory.

➡The < > icon lights in the viewfinder.

➡The center AF point will flash in red.

➡In the viewfinder, the display appears as shown in 1 for 0.5 seconds, then changes to 2.

●Each time you press the < > button the preflash fires, and the FE lock is applied at the required exposure level.

Take the picture.

4● Compose the shot and take the picture.

If the subject is far enough away to cause underexposure, the < > icon will blink in the viewfinder. Move closer to the subject and repeat steps 2 – 4.

90