Spanning Tree Protocol
Issue 1 July 2006 131
Spanning Tree Protocol CLI Commands
The following table contains a list of CLI commands for the Spanning Tree feature. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
In order to... Use the following
command...
Enable/Disable the spanning tree
application for the switch set spantree
Set the bridge priority for
spanning tree set spantree priority
Set the RSTP bridge spanning
tree max-age parameter set spantree max-age
Set the RSTP bridge hello-time
parameter set spantree hello-time
Set the RSTP bridge
forward-delay time parameter set spantree forward-delay
Select between STP operation or
RSTP switch operation set spantree version
Display the bridge and per-port
spanning tree information show spantree
Set the TX hold count for the STA set spantree priority
Add a port to the spanning tree
application set port spantree enable
Remove a port from the spanning
tree application set port spantree disable
Set the port spantree priority
level set port spantree priority
Set the cost of a port set port spantree cost
Set the port as an RSTP port
(and not as a common STA port) set port spantree
force-protocol-migration
Display a port's edge admin and
operational RSTP state show port edge state
1 of 2