Installation
46 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Installing and Removing a SFP GBIC Transceiver
The SFP GBIC transceiver is fastened using a snap-in clip.
To install the SFP GBIC transceiver:
●Insert the transceiver (take care to insert it the right way up) until it clicks in place.
●Refer to Copper GBIC Transceiver Installation Noteson page 47 if you are installing a
copper GBIC transceiver.
To remove the SFP GBIC transceiver:
1. Press the clip on the base of the transceiver see Figure 15 for the location.
Figure 15:Clip Location on Base of Transceiver
.
2. Pull the transceiver out.
Figure notes:
1. Transceiver clip location
Table8: Gigabit Fiber Optic Cabling 1 of 2
Gigabit
Interface Fiber
Type Diameter
(µm) Modal
Bandwidth
(MhzKm)
Maximum
Distance
(m)
Minimum
Distance
(m)
Wavelength
(nm)
1000BASE-SX MM 62.5 160 220 2 850
1000BASE-SX MM 62.5 200 275 2 850
1000BASE-SX MM 50 400 500 2 850
1000BASE-SX MM 50 500 550 2 850
1000BASE-LX MM 62.5 500 550 2 1,310
1000BASE-LX MM 50 400 550 2 1,310
1 of 2
1