Issue 1 July 2006 151
Chapter 9: Avaya C360 Layer 3 Features
This section describes the C360 Layer 3 features. It provides the basic procedures for
configuring the C360 for Layer 3 operation.
●Obtaining and Activating a License Key
●What is Routing?
●Routing Configuration
●IP Configuration
●RIP (Routing Interchange Protocol) Configuration
●OSPF (Open Shortest Path First) Configuration
●Static Routing Configuration
●Route Redistribution
●ARP (Address Resolution Protocol) Table Configuration
●BOOTP/DHCP (Dynamic Host Configuration Protocol) Relay Configuration
●NetBIOS Re-broadcast Configuration
●VRRP (Virtual Router Redundancy Protocol) Configuration
●Policy Configuration
●IP Fragmentation and Reassembly
Layer 3 features only apply to the C360 operating in router mode. You must purchase a Routing
License Key Certificate for the C360 and activate the feature in order to operate in router mode.
Refer to Obtaining and Activating a License Key on page 151 for further information.

Obtaining and Activating a License Key

Each Certificate is specific for:
●The switch type.
●The required feature.
●The number of devices.
After you purchase a Routing Licence Key Certificate, you must obtain and activate a Routing
License Key.